Harbor Freight Tools Cordless Drill 92188 User Manual

Item 92188 Angle Drill  
With Keyless Chuck  
Operating Instructions  
3491 Mission Oaks Blvd., Camarillo, CA 93011  
'LVWULEXWHGꢀH[FOXVLYHO\ꢀE\ꢀ  
Š
+DUERUꢀ)UHLJKWꢀ7RROV ꢁ  
Copyright© 2004 by Harbor Freight Tools®. All rights reserved. No portion  
of this manual or any artwork contained herein may be reproduced in any shape  
or form without the express written consent of Harbor Freight Tools.  
For technical questions and replacement parts, please call 1-800-444-3353.  
Thank you for choosing a Harbor Freight Tools product! For future reference, please com-  
plete the owner’s record below:  
model:___________________ Purchase Date:__________________  
Save the receipt, and these instructions. It is important that you read the entire instruction  
sheet to become familiar with this product before you begin using it.  
Technical Specifications:  
Angle Drill includes 3/8” Shaft Attachment  
Hex Shaft Size: 5/16”  
Spindle Thread: 3/8” - 24  
Maximum Speed: 6000 RPM  
Safety Warnings and Precautions  
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of  
personal injury and damage to equipment.  
Read all instructions before using this product!  
1. Do not exceed 6,000 RPm maximum speed.  
2. Avoid working alone. If an accident happens, an assistant can bring help.  
3. Keep work area clean. Cluttered areas invite injuries.  
4. Keep children away. Children must never be allowed in the work area. Do not let them handle ma-  
chines, tools, or extension cords.  
ReV 09b  
 
Assembling and Operating the Angle Drill  
1.  
Unplug the electric drill or disconnect the air hose on the air powered drill before attempting to attach  
the Angle Drill. The drill used to power the Angle Drill should also be turned OFF.  
2.  
Insert the Shaft (#13) of the Angle Drill into the chuck of the drill being used to power this attachment.  
Properly align and tighten the Shaft in place (read instructions provided with the drill being used to  
power this attachment).  
3.  
4.  
Insert the bit of choice into the Chuck Casing (#12) of the Angle Drill and tighten in place (the chuck is  
keyless).  
Properly grip the Drill/Angle Drill Attachment. One hand will operate the power drill and the other  
hand will wraparound the Spindle Case (#2) of the Angle Drill attachment, to support the tool while it  
is being used.  
5.  
6.  
Before using the Angle Drill on the workpiece, turn on the drill and test its operation. Make sure the  
Angle Drill is properly aligned for maximum leverage. Check that the drill bit is properly inserted.  
The Angle Drill is now ready to be used. Align the drill bit on the workpiece. While firmly holding the  
power drill and the Angle Drill, turn on the power drill and begin drilling.  
Caution: Always unplug the power drill or disconnect the air hose on air powered drills, before  
changing bits or making adjustments to the Angle Drill.  
Parts List  
#
Description  
Qty  
1
2
3
4
5
6
7
8
Needle Bearing  
Spindle Case1  
Clutch Pin  
Ball Bearing  
Bevel Gear  
Ball Bearing  
Angle Head  
Key  
Bevel Gear  
Bearing Cap  
Chuck Casing  
Chuck Screw  
Shaft  
1
1
2
1
1
1
1
1
1
1
1
1
9
10  
11  
12  
13  
Note: Some parts are listed and shown for illustration purposes only and are not  
available individually as replacement parts.  
SKU 92188  
For technical questions, please call 1-800-444-3353.  
Page 3  
 
Parts Diagram  
PLeASe ReAD tHe FOLLOWING CAReFULLY  
tHe mANUFACtUReR AND/OR DIStRIBUtOR HAS PROVIDeD tHe PARtS DIAGRAm  
IN tHIS mANUALASAReFeReNCe tOOL ONLY. NeItHeR tHe mANUFACtUReR NOR  
DIStRIBUtOR mAKeS ANY RePReSeNtAtION OR WARRANtY OF ANY KIND tO tHe  
BUYeR tHAt He OR SHe IS QUALIFIeD tO mAKe ANY RePAIRS tO tHe PRODUCt  
OR tHAt He OR SHe IS QUALIFIeD tO RePLACe ANY PARtS OF tHe PRODUCt. IN  
FACt, tHe mANUFACtUReR AND/OR DIStRIBUtOR eXPReSSLY StAteS tHe ALL  
RePAIRS AND PARtS RePLACemeNtS SHOULD Be UNDeRtAKeN BY CeRtIFIeD  
AND LICeNSeD teCHNICIANS AND NOt BY tHe BUYeR. tHe BUYeR ASSUmeS  
ALL RISK AND LIABILItY ARISING OUt OF HIS OR HeR RePAIRS tO tHe ORIGINAL  
PRODUCt OR RePLACemeNt PARtS tHeRetO, OR ARISING OUt OF HIS OR HeR  
INStALLAtION OF RePLACemeNt PARtS tHeRetO.  
SKU 92188  
For technical questions, please call 1-800-444-3353.  
Page 4  
 

Harbor Freight Tools Air Compressor 99925 User Manual
Harbor Freight Tools Automobile Accessories 46908 User Manual
Harbor Freight Tools Power Hammer 93364 User Manual
Honeywell Cell Phone 4909 CPVC User Manual
Honeywell Electric Heater HZ 519 User Manual
Honeywell Thermostat CT2700 User Manual
HP Hewlett Packard Computer Drive 1500 cs User Manual
HP Hewlett Packard Computer Hardware XW User Manual
Husqvarna Lawn Mower 153 S User Manual
IBM Network Card L150 User Manual